Internal Mimer SQL Return Codes
Here the internal Mimer SQL return code values are listed together with the associated text message. See Run-time Errors for details on how to retrieve this information after an exception has been raised.
The codes are grouped according to function as follows:
> 0 = 0 Success 100 No data -100 to -999 -10000 to -10999 -11000 to -11999 -12000 to -12999 -13000 to -13999 Not currently used -14000 to -14999 -15000 to -15999 Not currently used -16000 to -16999 -17000 to -17999 Not currently used -18000 to -18999 -19000 to -19999 -20000 to -20999 Not currently used -21000 to -21999 -22000 to -22999 -23000 to -23999
Corrective action is given in general terms for each group of codes. When reporting errors to Mimer support, make sure you include the internal Mimer SQL return code.
Warnings and Messages
No corrective action is normally required for internal Mimer SQL return code values greater than zero.
54 Character string was truncated 55 Insufficient item descriptor areas 56 Privilege not revoked 57 Privilege not granted 58 Zero bits were added to the binary string 90 Login failure 91 Soft enter performed 92 No cursor state was saved on stack 94 Message text not found 100 Row not found for FETCH, UPDATE or DELETE, or the result of a query is an empty table 100 No data - Item number is greater than the value of count
ODBC Errors and Warnings
These errors occur when ODBC calls to Mimer SQL fail for some reason.
-100 Illegal sequence -101 Out of memory -102 Option out of range -103 Function not supported -104 Connection not open -105 Connection in use -106 Invalid argument value -107 Invalid transaction operation code -108 Internal network buffer overflow -109 Invalid C data type -110 Invalid SQL data type -111 Bad address -112 Function already active -113 Operation canceled -114 Wrong number of parameters -115 Use ODBC function SQLEndTran (or SQLTransact for ODBC 2 applications) to commit or rollback transaction -116 Statement is not in a prepared state -117 Invalid transaction state -118 Unknown statement type -119 Server data type not supported by client -120 Unknown data type -121 Invalid buffer length -122 String data truncated -123 Numeric data truncated -124 Numeric value out of range -125 Invalid numeric value -126 Bad parameter passed to numeric package -127 Invalid column number -128 Database name mandatory -129 Connect dialog failed -130 Data truncated -131 Invalid connection string attribute -132 Invalid cursor state -133 Invalid parameter number -134 Descriptor type out of range -135 Invalid type passed to DICOA3 -136 Function type out of range -137 Invalid cursor name -138 Duplicate cursor name -139 Cursor hash table corrupt -140 ODBC database control block chain corrupt -141 Option type out of range -142 Option value not supported -143 Option not supported -144 Invalid row or keyset size -145 Invalid concurrency option -146 Invalid fetch type -147 Not a scrollable cursor -148 Row position out of range -149 Only one SQLPutData for fixed length parameter -150 SQLPutData does not support block cursors -151 Driver not capable -152 Table type out of range -153 Invalid string length -154 Data type out of range -155 Syntax error found in escape clause -156 DDO buffer overflow -157 Uniqueness option type out of range -158 Accuracy option type out of range -159 Column type out of range -160 Scope type out of range -161 Nullable type out of range -162 Internal type mismatch -163 Conversion between data types not supported -164 Invalid date, time, or timestamp -165 Restricted data type attribute violation -166 Date, time, or timestamp data truncated -167 Database has not been configured. Run Configure MIMER 7.1 -168 Translated native SQL string was truncated -169 ODBC extension DATE, TIME or TIMESTAMP is not supported -170 ODBC extension OUTER JOIN is not supported -171 ODBC extension for procedure invocation is not supported -172 Unrecognized first word in escape clause, expected 'CALL','FN','OJ','D','T' or 'TS' -173 This server version does not support the used scalar function -174 Unrecognized scalar function found in escape clause -175 Argument missing in scalar function -176 Too many arguments in scalar function -177 Syntax error, incomplete escape clause -178 Syntax error, unmatched apostrophe in string literal -179 Syntax error, unmatched quote in delimited identifier -180 Invalid data type specified in scalar function CONVERT -181 Information type out of range -182 Parameter type may only be used with procedures -183 Parameter type out of range -184 Update and delete where current fully supported (not simulated) -185 Option value changed -186 Static scrollable cursor used instead of keyset or dynamic cursor -187 Error in row, please check next error code -188 Cancel treated as FreeStatement/CLOSE -189 Attempt to fetch before the result set returned the first rowset -190 Invalid cursor position -191 Unknown first parameter in scalar function TIMESTAMPADD -192 Unknown first parameter in scalar function TIMESTAMPDIFF -193 Bad parameter passed to datetime package -194 Out of critical section objects -196 Invalid attribute option identifier -197 Attribute cannot be set now -198 General error -199 Invalid use of an automatically allocated descriptor -200 Invalid descriptor field identifier -201 Invalid descriptor index -202 Associated statement not prepared -203 Interval second fraction truncated -204 Interval truncation error -205 Interval convert error -206 Year to month interval cannot be converted to a numeric value because it is not a single field -207 Interval cannot be converted to a numeric value because it is not a single field -208 Invalid interval literal -209 Interval leading field truncation error -210 Interval trailing field truncated -211 Binary data truncated -212 Binary truncation error -213 Binary length invalid -214 Binary data invalid -215 Binary not supported -216 Inconsistent descriptor information -217 Cannot modify IRD -218 Invalid use of null pointer -219 Character data not hexadecimal -220 Internal error -221 Significant parts of datetime/interval string truncated -222 Interval field truncation -223 String data truncated -224 Binary data truncated -225 String data truncated -226 Binary data truncated -227 Internal error - Must put blob separately -228 UNICODE string data conversion error -229 LOB data larger than specified in SQL_LEN_DATA_AT_EXEC(x) -230 Distributed transaction mode is active, but no transaction enlist has been performed. May be due to early transaction abort or illegal sequence of calls in application. -232 Wide character data types not supported by server -233 SQL_LEN_DATA_AT_EXEC(n) only allowed for long data types -235 Maximum escape clause nesting depth reached -300 Failed to read dictionary -804 Unable to translate MSDTC transaction id to an XA transaction id (XID) -805 Unable to perform distributed transaction enlist -806 Invalid sequence of calls within ODBC to MSDTC interface routines
These errors arise when an SQL statement cannot be executed correctly because of the data content of variables, expressions, and so on in the statement. The appropriate corrective action is determined by the nature of the error and the specific context in the application program.
-10001 Transaction aborted due to conflict with other transaction -10002 Transaction aborted due to conflict with in-doubt transaction Do not retry transaction until in-doubt state resolved -10100 PRIMARY KEY constraint violation, attempt to insert NULL value -10101 PRIMARY KEY constraint violation, attempt to insert duplicate value -10102 Domain constraint violation <%> -10103 Table constraint violation <%> -10104 View constraint violation <%> -10105 INSERT or UPDATE operation invalid because the referencing table <%> does not satisfy a referential constraint -10106 UPDATE or DELETE operation invalid because the referenced table <%> does not satisfy a referential constraint -10107 The result of a subquery is more than one value -10108 Result of SELECT INTO or EXECUTE INTO statement is a table of more than one row -10109 Type constraint violation -10110 UNIQUE constraint violation -10199 Host variable type packed decimal is not supported -10200 Reserved numeric operand found during data type conversion -10201 Length error or incorrect value found during data type conversion -10202 Division by zero attempted -10203 Negative overflow occurred during data type conversion -10204 Positive overflow occurred during data type conversion -10205 Loss of significance occurred during data type conversion -10207 Undefined value found during data type conversion -10208 Restricted data type attribute violation -10210 Error in assignment -10211 Undefined value found during data type conversion -10212 Overflow occurred during data type conversion -10221 The NULL value cannot be assigned to a host variable because no indicator variable is specified -10222 NULL not allowed for item descriptor area -10250 Data type not supported -10301 Loss of significance occurred in arithmetic operation <%> -10302 Positive overflow occurred in arithmetic operation <%> -10303 Negative overflow occurred in arithmetic operation <%> -10304 Division by zero attempted -10305 Bad parameter encountered in arithmetic operation <%> -10306 Invalid input for numeric function -10307 The binary strings are of unequal length -10310 Invalid character value for CAST -10311 String data truncated -10312 Numeric value out of range -10313 Illegal (negative) substring length -10314 Like pattern escape character not followed by underscore or percent character -10315 Length of like pattern escape character is not equal to 1 -10316 Data truncated -10317 Invalid hexadecimal string -10321 Datetime loss of significance -10322 Datetime positive overflow -10323 Datetime negative overflow -10325 Bad parameter encountered in datetime operation -10326 Datetime illegal operand -10327 Invalid datetime value -10328 Datetime subtype mismatch -10329 Invalid datetime format -10331 Interval loss of significance -10332 Interval positive overflow -10333 Interval negative overflow -10335 Bad parameter encountered in interval operation -10336 Interval illegal operand -10337 Invalid interval value -10338 Interval subtype mismatch -10339 Invalid interval format -10340 Length error for large object -10351 Character string contains non-ascii character -10352 Character string literal contains illegal UNICODE character -10354 Bad parameter encountered in UNICODE conversion routine -10355 Bad length parameter encountered in UNICODE conversion routine -10356 Character string not aligned on proper byte boundary -10401 Illegal character found when converting from UNICODE to ASCII -10402 Illegal character found when converting from ASCII to UNICODE -10403 The argument to the UNICODE_CHAR function is an invalid UNICODE value -10451 Character or binary string too long -10601 Invalid value for field of item descriptor area -10602 Invalid datetime or interval code -10603 PRECISION field of SQL descriptor cannot be set on non-numeric data types
These errors arise when internal limits in the Mimer SQL system are exceeded. Some of the limitations are determined by installation-specific parameters, while others are fixed by Mimer SQL. In general, errors of this nature require either re-installation of the system with extended limitations or modification of the application program to reduce the system demands.
Contact your Mimer representative if you have difficulty avoiding errors of this nature.
-11001 Dynamic storage area exhausted in host level interface (DYNDE3) -11002 Internal DB dynamic storage area (SQLPOOL) exhausted -11011 Internal storage (SQLPOOL) for like pattern exhausted -11012 Transaction list exhausted -11013 Too many databanks referenced in statement (max 30) -11014 Too many databanks active in transaction -11047 The maximum number of recursive invocations has been exceeded -11100 Internal limit exceeded : query stack -11101 Internal limit exceeded : scan stack -11102 Internal limit exceeded : generation stack -11103 Internal limit exceeded : table descriptor list -11105 Internal limit exceeded : patch table -11106 Internal limit exceeded : label table -11107 Internal limit exceeded : traversal stack -11108 Internal limit exceeded : sco list -11109 Internal limit exceeded : boolean stack -11111 Internal limit exceeded : semantic stack -11113 Internal limit exceeded : statement too complex -11114 Required temporary table row length is <%>, only <%> is possible -11115 Internal limit exceeded : restriction group pool -11118 Internal limit exceeded : scan queue
SQL Statement Errors
These errors arise from syntactic or semantic errors in SQL statements. In general, syntactic errors in ESQL programs are detected by the preprocessor, so errors cannot arise at run-time.
Dynamically submitted SQL statements are however parsed at run-time, and the syntax error codes are returned after attempting PREPARE for a syntactically incorrect source statement.
Semantic errors can arise at run-time from both dynamic and static SQL statements.
-12001 Too many errors, error collection terminated -12101 Syntax error, <%> assumed missing -12102 Syntax error, <%> ignored -12103 Syntax error, <%> assumed to mean <%> -12104 Invalid construction -12106 Internal parser error, analysis aborted -12107 Syntax analysis resumed here -12108 Multiple statements not allowed -12109 Character string literal contains non-ascii character -12110 Delimited identifier contains non-ascii character -12120 Table name too long -12121 String literal too long -12122 Numeric literal too long -12123 Invalid password string -12124 Invalid hexadecimal literal -12125 Reserved word may not be used as an identifier -12126 Invalid name -12128 Result of concatenation too long -12129 Table definition does not include any column specification -12131 Table definition includes more than one PRIMARY KEY specification -12132 Only one column allowed in column list -12152 <%> not allowed in EXECUTE mode -12154 User name too long -12156 Column name too long -12157 Synonym name too long -12158 Correlation name too long -12159 Cursor name too long -12160 Databank name too long -12161 Shadow name too long -12162 Host Variable or Parameter Marker name too long -12163 File name too long -12164 Label name too long -12165 Index name too long -12166 Object name too long -12167 View name too long -12168 Domain name too long -12169 Too many identifier names given -12174 Syntax error in escape clause, expecting comma before PRODUCT or CONFORMANCE specification -12175 Syntax error in escape clause, invalid CONFORMANCE specification -12176 Syntax error in escape clause, invalid YEAR specification -12177 Syntax error in escape clause, invalid PRODUCT specification -12178 Syntax error in escape clause, invalid VENDOR specification -12179 Syntax error in escape clause, expecting VENDOR or YEAR after '--(*' -12180 Syntax error, unexpected token '*)--' -12181 Syntax error in escape clause, terminating '*)--' missing -12182 Syntax error in escape clause -12200 Table <%> not found, table does not exist or no access privilege -12201 Table reference <%> is ambiguous -12202 <%> is not a column of an inserted table, updated table or any table identified in a FROM clause -12203 <%> is neither an object table of an INSERT, UPDATE or DELETE statement, nor specified in a FROM clause -12204 Column reference <%> ambiguous -12205 Column <%> not referenced in GROUP BY clause -12207 DISTINCT specified more than once in a subselect -12208 SELECT clause of a subquery specifies more than one column -12209 Column <%> identified in HAVING clause but not included in GROUP BY clause -12210 Operand of set function includes a set function -12212 Operand of set function includes a correlated reference specified in an expression -12213 Set function not specified in a SELECT clause or HAVING clause -12214 Invalid operand type, expected type is <%> -12215 Operand not of <%> type -12216 Operands are not comparable -12217 Set function containing DISTINCT may not be specified within an expression -12220 Expression must be a column -12221 SELECT clause contains both column expressions and set function expressions -12223 ORDER BY clause invalid because it includes a column name that is not part of the result table -12224 ORDER BY clause invalid because it includes an integer which does not identify a column of the result table -12225 The ORDER BY clause is invalid because it includes an ambiguous column reference -12226 Set function argument not bound in HAVING context -12227 Duplicate column reference in FOR UPDATE OF clause -12230 Invalid numeric literal -12231 Update or insert value is NULL, but the object column <%> cannot contain NULL values -12232 Insert value must be a constant expression or NULL -12233 The number of insert values is not the same as the number of object columns -12234 Update or insert value not compatible with the data type of the object column <%> -12236 Column name <%> does not identify a unique column of the result table -12238 Column <%> cannot be updated because it is derived from a set function or expression -12239 The use of NULL in a SELECT clause is only allowed in a UNION -12240 Statement contains too many table references -12242 The corresponding columns of the operands of a UNION do not have compatible column descriptions -12243 Result table contains a column for which the type cannot be determined -12244 Operands of a UNION do not have the same number of columns -12245 FOR UPDATE clause may not be specified because the result table cannot be modified -12246 Column <%> in the FOR UPDATE clause is not part of the identified table or view -12250 A host variable or parameter marker is not allowed in a view definition -12251 CREATE VIEW statement must include a column list because the SELECT clause contains an expression -12252 CREATE VIEW statement must include a column list because the SELECT clause contains duplicate column names -12253 The number of columns specified for the view is not the same as specified by the SELECT clause -12254 WITH CHECK OPTION cannot be used for the specified view because it cannot be modified -12258 <%> operation not permitted because the view cannot be modified -12259 <%> operation not permitted because the joined table cannot be modified -12260 LOAD operation not permitted, the table contains a trigger specification -12261 INSERT statement not permitted because the object column <%> is derived from an expression -12262 The type of the parameter marker cannot be determined -12263 Parameter markers and host variables not allowed in EXECUTE IMMEDIATE environment -12264 Parameter markers may not be specified in SELECT clause -12265 Literal or computed value overflow -12266 Decimal divide operation invalid because the result would have a negative scale -12267 Duplicate column reference in INSERT column list -12268 Duplicate column reference in UPDATE set clauses -12269 Duplicate column reference in View Parameter -12270 <%> does not have <%> privilege on object <%> -12271 Duplicate column reference in GROUP BY clause -12273 The types of the results of a CASE expression are not type compatible -12274 The type of the CASE expression result cannot be determined -12275 At least one result in a CASE expression must be non-null -12277 Invalid CAST data type specification -12278 Invalid EXTRACT field specification -12280 Invalid datetime literal -12281 Invalid interval literal -12282 Invalid interval qualifier -12283 Invalid use of interval qualifier -12300 Syntax error in escape clause -12301 Translated native SQL string was truncated -12302 The function <%> is not supported -12303 Unrecognized first word, <%> in escape clause expected 'CALL', 'FN','OJ', 'D', 'T' or 'TS' -12304 Unrecognized scalar function <%> -12305 Invalid data type <%> in function CONVERT -12306 Syntax error, incomplete escape clause -12307 Syntax error, unmatched apostrophe in string literal -12308 Syntax error, unmatched quote in delimited identifier -12309 Unknown first parameter <%> in scalar function <%> -12310 Argument missing in scalar function <%> -12311 Too many arguments in scalar function <%> -12500 A databank named <%> already exists (or filename already used) -12501 Table <%> does not exist -12502 <%> does not have <%> privilege -12503 <%> does not have <%> privilege on object <%> -12504 Statement not allowed within transaction -12505 <%> is not a USER or PROGRAM ident -12506 No privilege -12507 <%> does not have any databank available (see CREATE DATABANK) -12509 An ident cannot REVOKE a privilege from itself -12510 An ident cannot GRANT a privilege to itself -12511 Duplicate column specification -12512 Invalid type description -12516 Qualified column name required -12517 Object <%> does not exist -12518 Circular grant of membership between groups not permitted -12520 An ident cannot GRANT a privilege to itself -12523 Databank <%> does not exist -12526 Default value for NOT NULL column <%> missing -12530 Operand not of type <%> -12531 Operands not comparable -12533 Literal or computed value overflow -12534 Invalid numeric literal -12535 Invalid identifier, keyword VALUE expected -12536 Name <%> in PRIMARY KEY specification not recognized as a column name of current table definition -12537 <%> must be unqualified -12538 Default value not compatible with domain definition -12539 Host variable construction illegal in this context -12540 <%> is not a column of the specified table(s) -12542 Default value is outside the range specified by domain definition -12544 Too many columns specified in <%> statement -12545 Primary key column <%> may not be updated because the table is in a NULL databank -12546 Column <%> is not type compatible with the corresponding column of the referenced table -12547 Number of columns specified in the foreign key is not the same as the number of columns in the primary key of the referenced table -12549 Databank option may not be changed to NULL since <%> contains tables with FOREIGN KEY, REFERENCE, UNIQUE or trigger specifications -12550 Table <%> includes a FOREIGN KEY or UNIQUE constraint and may therefore not be created in a databank with NULL option -12551 Table <%> is in a databank with NULL option and may therefore not be used as referential constraint -12552 A UNIQUE index can not be created for table <%> as it is located in a databank with NULL option -12553 Explicit grant membership on PUBLIC is not permitted -12554 PUBLIC cannot be member of another group -12556 <%> cannot be shadowed because it is a NULL databank -12557 Shadow named <%> already exists -12558 Ident named <%> already exists -12559 Index named <%> already exists -12560 Table, View or Synonym named <%> already exists -12561 Domain <%> not found, domain does not exist or no usage privilege -12563 Shadow <%> does not exist -12564 Ident <%> does not exist -12565 Maximum row length exceeded by index or key table -12566 Maximum row length exceeded by base table -12568 EXISTS construction illegal in this context -12569 ALL or ANY construction illegal in this context -12570 Set function construction illegal in this context -12571 Subquery construction illegal in this context -12572 Too many columns given in FOREIGN KEY clause -12573 Name <%> in CHECK clause not recognized as a column name of current table definition -12574 Name <%> in column constraint not recognized as current column name -12577 Default value not compatible with column specification -12579 No such unique constraint in referenced table -12581 Too many columns given in UNIQUE constraint -12582 UNIQUE constraint equivalent to PRIMARY KEY constraint -12583 UNIQUE constraint equivalent to previously given UNIQUE constraint -12585 Name <%> in FOREIGN KEY clause not recognized as a column name of current table definition -12589 An ident or a schema owning any collation cannot be dropped. Drop collation first -12590 Table contains too many columns -12591 Cannot create unique index -12592 Dependencies exist, RESTRICT specified -12593 Column <%> does not exist -12594 Column <%> cannot be dropped as it is the only column in table -12595 Column <%> cannot be dropped, dependencies exist -12596 Default value for column <%> does not exist -12597 Change of data type is not allowed for a column included in a key or index -12598 The datatype for a column can not be changed to/from a domain -12599 The proposed data type change is not supported -12600 Change of data type is not supported for a column used by a view, routine trigger or precompiled statement -12601 Statement does not support backup of <%> -12602 The same file name is given for backup and incremental backup -12603 Database is already OFFLINE -12604 Database is already ONLINE -12605 Cannot RESET LOG, because database is ONLINE -12606 Databank <%> is already OFFLINE -12607 Databank <%> is already ONLINE -12608 Cannot RESET LOG, because databank <%> is ONLINE -12609 Shadow <%> is already OFFLINE -12610 Shadow <%> is already ONLINE -12611 Cannot RESET LOG, because shadow <%> is ONLINE -12612 Shadow <%> is already specified -12613 Cannot set more than one shadow OFFLINE for databank having shadow <%> -12614 Statistics cannot be updated for <%> because it is a view -12615 Filename already used by databank or shadow -12616 Cannot SET DATABASE OFFLINE, because another user is connected -12617 Cannot SET DATABANK <%> OFFLINE, because the databank is in use -12618 INCREMENTAL backups can only be used in conjunction with EXCLUSIVE -12620 A domain named <%> already exists -12621 A schema named <%> already exists -12622 The schema name for the index table must be the same as the schema name for the table -12623 A PRIMARY KEY constraint for this table has already been defined -12624 The UNIQUE constraint cannot be created because the columns contain duplicates -12625 Referential constraint criteria not fulfilled -12626 Check constraint criteria not fulfilled -12627 One or more specified columns does not exist in table -12628 Referenced table or column not found -12629 FOREIGN KEY not referencing a compatible UNIQUE or PRIMARY KEY -12630 Constraint <%> cannot be dropped, dependencies exist -12631 PRIMARY KEY or UNIQUE column constraint not valid when records exist -12632 Collation <%> does not exist -12633 A collation named <%> already exists -12634 Invalid collation definition string -12635 Collation <%> cannot be dropped, used by domain or column -12636 A collate clause can only be specified for character types -12637 Expressions with different collating sequences can not be compared -12638 Collation specified in ORDER BY must be the same as used in DISTINCT/UNION -12639 Column of type LARGE OBJECT not allowed in PRIMARY KEY, UNIQUE, FOREIGN KEY or INDEX -12640 Precompiled statement <%> does not exist (or no execute privilege) -12641 A precompiled statement named <%> already exists -12642 Invalid SQL construction used in CREATE STATEMENT -12643 Column of datatype LARGE OBJECT not allowed in this context -12644 SQL syntax error, only EXECUTE STATEMENT allowed -12645 Column of datatype LARGE OBJECT not allowed in a databank having shadow -12646 Precompiled statement is not scrollable -12647 Precompiled statement is scroll only -12648 Not allowed to change table as it is used by a precompiled statement -12650 Only the creator of a precompiled statement may alter it -12701 <%> is a reserved word, and cannot be used as the name for a symbol -12702 <%> is a global variable, and cannot be used as the name for a variable or parameter -12703 The class <%> is already present in the handler declaration -12704 The SQLSTATE <%> is already present in the handler declaration -12705 The condition identifier <%> is already present in the handler declaration -12706 The condition identifier <%> is already used in another handler in this scope -12707 A condition identifier for the SQLSTATE <%> has already been defined in this scope -12708 <%> is not a valid SQLSTATE value -12709 The SQLSTATE <%> associated with the condition identifier <%> is already present in the handler declaration -12710 An exception handler for the state (<%>) associated with the condition identifier <%> has already been defined in this scope -12711 An exception handler for the state <%> has already been defined in this scope -12712 An exception handler for the class <%> has already been defined in this scope -12713 The default literal is too large for this data type -12714 The literal value is too large for this data type -12715 The type of the default value is not compatible with the type of the variable -12717 Invalid declaration. The maximum precision for this data type is <%> -12718 The scale cannot exceed the precision -12720 The number of correlation names for <%>, does not match number of result types -12721 The parameter <%> for a result set procedure must be declared as IN -12722 The parameter <%> is declared as IN, and cannot be assigned -12723 The parameter <%> is declared as OUT, and cannot be used in expressions -12724 <%> cannot be assigned a value directly -12725 Result set procedures can only be used in cursor declarations -12726 The formal argument of the routine is IN but the actual argument is OUT -12727 The formal argument of the routine is OUT but the actual argument is IN -12728 Literals or expressions cannot be used for OUT parameters -12729 Return statements are only allowed in result set procedures or functions -12730 Recursive call to <%>, not allowed -12731 <%> statement not allowed in result procedure -12732 The procedure <%> does not return a result set and cannot be used in a declare cursor for call -12733 RESIGNAL statement only allowed in exception -12734 Wrong number of items in result clause, <%> expected -12735 Wrong number of parameters, <%> expected -12736 Invalid type for argument, <%> expected -12737 Too long name <%> -12738 Duplicate declaration <%> -12739 x.y.z names not allowed -12740 Syntax error, <%> assumed to mean <%> -12741 The label or routine <%> is not defined -12742 The label <%> is not defined -12743 The procedure <%> does not exist (or no execute privilege) -12744 The variable <%> is not defined -12745 The condition identifier <%> is not defined -12746 The cursor <%> is not defined -12747 Use of domains in PSM control statements not allowed -12748 Operands are incompatible -12749 The SQL module <%> already exists -12750 The procedure <%> already exists -12751 Duplicate parameter <%> -12752 The procedure <%> is declared in an SQL module, and cannot be dropped directly -12753 Failed to read data dictionary -12754 The length of a host variable cannot exceed 32 -12755 Host variables cannot be used within a procedure -12756 The data type for the parameter marker cannot be determined -12757 The number of items in the into clause is less than the number of items in the select list -12758 The number of items in the into clause is greater than the number of items in the select list -12759 The number of items in the fetch into clause is less than the number of items in the cursor declaration -12760 The number of items in the fetch into clause is greater than the number of items in the cursor declaration -12761 A fetch direction other than next, can only be defined for a scrollable cursor -12762 The value in a fetch absolute or relative must be an integer -12763 The argument to fetch absolute must be larger than 0 -12764 A cursor for call is read only and cannot be used in a update or delete where current statement -12765 The cursor is declared as read only and cannot be used in a update or delete where current statement -12766 The table name in the <%> statement is not the same as the name used in the cursor declaration -12767 The column <%> is not specified in the for update list of the cursor declaration -12768 The size for a data type must be larger than zero -12769 It is not allowed to declare exception handlers or condition identifiers for the SQLSTATE successful completion ('00000') -12770 The formal argument of the procedure is declared as INOUT but the actual argument is <%> -12771 A handler declaration cannot contain both an exception class and SQLSTATE values or condition identifiers -12772 The procedure does not return a result set and therefore cannot be used with a scroll cursor -12773 <%> is not a column and is not declared as a variable or parameter -12774 The label <%> has already been declared -12775 The statement requires <%> access -12776 <%> statement is only allowed if the access indication is MODIFIES SQL DATA or READS SQL DATA -12777 <%> statements are only allowed if the access indication is MODIFIES SQL DATA -12778 The access indication for a result set procedure must be READS SQL DATA or CONTAINS SQL -12779 An UNDO exception handler can only be specified in an atomic compound statement -12781 Only assignment and comparison operations allowed -12782 The column name <%> has already occurred in this row declaration -12783 The field <%> is not defined in the row data type -12784 The row data types do not have the same number of fields -12785 A row data type variable may not be used as a parameter or result type nor in a DML statement -12800 Functionality not supported: <%> -12801 Referencing OLD TABLE is not allowed if trigger event is INSERT -12802 Referencing NEW TABLE is not allowed if trigger event is DELETE -12803 The compound statement in a triggered action must be atomic -12804 Referencing OLD or NEW ROW may only be used if FOR EACH ROW is specified -12805 A column list can only be specified if trigger event is UPDATE -12806 Duplicate column name in OF list -12807 It is not allowed to modify the <%> table -12808 The trigger time for a view must be INSTEAD OF -12809 The trigger time for a base table can not be INSTEAD OF -12810 Only the creator of a table is allowed to create a trigger for the table -12811 It is not allowed to create triggers for tables, located in databanks with NULL option -12812 Referencing OLD or NEW table is not allowed in FOR EACH ROW triggers -12813 A trigger with the name <%> already exists -12830 A function with the name <%> already exists -12831 The function <%> does not exist (or no execute privilege) -12832 The result of the expression is not deterministic while the routine is declared as deterministic -12833 All privileges used in a trigger must be held with grant option -12834 The sequence <%> does not exist -12835 A sequence with the name <%> already exists -12836 The keyword NULL cannot be used <%> -12837 The operands to a overlaps predicate must be of a row data type with two elements -12838 The two elements in an operand to the overlaps predicate must either be of the same type or otherwise it shall be possible to add the second value to first value -12839 <%> is not allowed in a before trigger -12840 The simple value specification for a get diagnostics statement must be of integer type -12841 <%> is not allowed in a trigger -12842 The increment for a sequence must be non zero -12843 Invalid values for sequence attributes -12844 The schema <%> does not exist (or no privilege) -12845 The schema name for routines in a module definition must be the same as the schema name for the module -12846 The value for diagnostics size must be positive -12847 The ident name in an authorization clause must be the same as the current user -12848 Constraint name already exists -12849 The function <%> MODIFIES SQL DATA and can thus not be used in a DML statement -12850 A trigger must be located in the same schema as the table -12851 A constraint must have the same schema name as the object to which it belongs -12852 The schema name for a routine is not the same as the schema name for the module -12853 Ident name not allowed as a schema with the same name exists -12854 A non-deterministic expression is not allowed in a check clause -12855 Default values with a reference to a sequence combined with a check clause is not allowed in an alter table statement -12856 Triggers and large object columns not allowed on a table -12857 The label <%> can not be used for an iterate statement -12858 The record <%> is not compatible with the <%>
These errors arise as a result of incorrect program construction. In general, corrective action requires revision of the program source code.
-14001 Invalid sequence of SQL statements -14002 SQL statement invalid because the user is not connected -14003 CONNECT statement invalid because the user is already connected -14004 System already closed down -14005 Cannot perform DISCONNECT in a transaction -14006 Login failure -14011 Transaction already started -14012 Transaction handling required -14013 No transaction started -14014 Cannot perform write operations as transaction status is read-only -14015 Commit or rollback statements are not allowed in an atomic execution context -14016 Select for update is not allowed for a read-only cursor -14017 Mixing DDL and DML statements in a transaction is not allowed -14018 Incremental backup not allowed in BACKUP transaction -14019 Operation not allowed in BACKUP transaction -14020 START BACKUP command required to perform an online backup -14021 Cannot perform ENTER or LEAVE in a transaction -14022 Cannot perform ENTER operation because program level is already active -14023 No program level entered, cannot perform leave operation -14024 Session statements are not allowed in a trigger -14025 START LOAD command required to perform a load operation -14026 The table name specified in the COMMIT/ROLLBACK LOAD statement does not match the table name (<%>) specified in the START LOAD statement -14027 Invalid transaction state, held cursor requires same isolation level -14031 DESCRIBE statement does not identify a prepared statement -14032 EXECUTE statement does not identify a prepared statement -14033 PREPARE statement identifies a SELECT statement of an opened cursor -14034 The cursor is not in a prepared state -14035 The cursor identified in a FETCH or CLOSE statement is not open -14036 The cursor cannot be used because its statement name does not identify a prepared SELECT statement -14037 The cursor identified in the UPDATE or DELETE statement is not open -14038 UPDATE or DELETE CURRENT statement not allowed for a cursor of a prepared SELECT statement -14039 Cursor is not scrollable -14041 The cursor identified in the UPDATE statement is not positioned on a row -14042 The cursor identified in the DELETE statement is not positioned on a row -14043 Routine signaled SQLSTATE -14044 Routine signaled a condition -14045 Prepared statement not a cursor specification -14046 The statement RESIGNAL was used outside a exception handler -14047 Duplicate transaction identifier -14048 Current user not owner of transaction -14049 Already associated with transaction -14050 The specified transaction identifier could not be found -14051 Invalid distributed transaction state -14052 It is not possible to mix local and distributed transactions -14053 The transaction identifier is in use by other user -14054 The requested operation cannot be performed in a distributed transaction -14101 Invalid statement identifier -14201 Compilation did not yield an executable program -14202 The cursor identified in an OPEN statement is already open, but not declared as REOPENABLE -14203 Statement position cannot be saved when temporary tables are used in the query -14210 Cursor for result set procedure may not be reopenable -14211 WITH HOLD option is only available for SELECT statements -14301 SQLDA contains an invalid data address or indicator variable address -14302 Invalid address of username or password -14303 Invalid address -14311 Illegal statement length given for SQL statement -14312 Input character string too long -14313 Like pattern string too long -14314 Username or password too long -14315 Illegal byte length of floating point number -14316 Unterminated C string, null byte not found -14321 Illegal host variable type -14322 Illegal host variable type in like pattern string -14323 Username and password must be fixed length character strings -14324 Illegal indicator variable type -14331 The number of provided host variables does not match the number of parameters -14332 Using clause required for dynamic parameters -14333 Using clause required for result fields -14401 Column cannot be updated because it is not identified in the UPDATE clause of the SELECT statement of the cursor -14402 The table identified in the UPDATE or DELETE statement is not the same as that designated by the cursor -14403 Cannot describe statement without naming information -14404 Cannot update table <%> because the declare statement is read-only -14405 Cannot delete from table <%> because the declare statement is read-only -14406 Unexpected statement type encountered in an UPDATE or DELETE statement -14501 Database connection is not open -14601 Invalid cursor state -14611 Using clause does not match dynamic parameters -14612 Using clause or Into clause does not match target specifications -14621 Cursor not found -14622 Ambiguous cursor name -14623 Invalid cursor name -14624 Cursor already allocated for statement -14631 Invalid SQL statement name -14641 Invalid SQL descriptor name -14642 Invalid descriptor index -14643 Invalid descriptor count -14651 Invalid exception number -14652 The xa_info string passed to xa_open or xa_close has an improper syntax -14653 Invalid flags argument passed to XA routine -14654 Asynchronous operations are not supported by XA routines -14700 No return statement was encountered during the execution of a function -14701 The statement is not allowed in an atomic execution context -14702 The same column has been updated to different values when executing a trigger -14703 An exception occurred during the execution of a trigger -14720 The maximum_value for the sequence <%> has been reached -14721 There is no current_value for the sequence <%> because the next_value function has not been invoked -14722 Sequence <%> locked by another user -14723 Update of attributes for the sequence <%> failed -14724 Not possible to allocate multiple sequence values -14725 WITH HOLD cursors can not be used with result procedures
Databank and Table Errors
These errors are associated with problems of physical access to databanks and tables. Locking errors should not result from transaction conflicts, but generally indicate either locking at the operating system level or malfunction of the internal Mimer SQL routines.
Many of the errors in this class are corrected by action taken at the operating system level. If errors persist in spite of corrective action, contact your Mimer representative.
-16001 Table locked by another user -16002 Table locked by another cursor -16003 Table in referential constraint definition locked by another user -16004 Table in referential constraint definition locked by another cursor -16005 Log locked by another user -16006 Backup unit log file locked -16101 No databank <%> found in dictionary -16135 Record no longer exists -16141 Syntax error in filename for databank <%> -16142 Cannot open databank <%>, file <%> not found -16143 File protection violation for databank <%>, file <%> -16144 Cannot open databank <%>, file <%> locked by other user -16145 Too many databanks open concurrently (direct access I/O limit) -16146 File create error, disk full -16147 File create error (quota exceeded) for databank <%>, file <%> -16148 Device or network connection not ready, databank <%>, file <%> -16149 Cannot open databank <%> in file <%> -16150 Tried to access databank <%> on node which is inaccessible because TRANSDB is OFFLINE -16151 Too many databanks open concurrently -16152 Tried to open a non-MIMER databank -16154 Table control area exhausted -16155 Incompatible version of databank <%> -16156 Databank <%> belongs to another system databank -16157 Tried to open a read-only databank with write access -16159 Old version of the databank <%> cannot be accessed without using the ALTER DATABANK .. RESTORE statement -16160 Cannot set TRANSDB shadow OFFLINE on the same node as the master TRANSDB -16161 Databank <%> disk space exhausted -16162 Databank LOGDB disk space exhausted -16163 Databank TRANSDB disk space exhausted -16164 Databank SQLDB disk space exhausted -16172 Databank <%> locked by another MIMER/DB user -16182 Databank <%> corrupt -16183 Bad parameter -16184 I/O error -16185 Internal databank identifier invalid -16186 Internal table identifier invalid -16187 Shadow <%> in file <%> has illegal sequence number -16189 Corrupt bitmap page -16190 Table root entry not found -16191 Exclusive access to databank required for attempted operation -16192 Load not allowed in databank with TRANS or LOG option -16193 TRANSDB and/or LOGDB not open -16194 Error occurred in transaction commit phase -16195 Internal inconsistency detected -16196 No end of table mark found for tableid -16197 Shadow <%> is already OFFLINE -16198 Shadow <%> is already ONLINE -16199 Result of bitmap page I/O undefined -16200 Result of index page I/O undefined -16201 Result of root page I/O undefined -16202 Result of data page I/O undefined -16203 Corrupt index page -16204 Corrupt root page -16205 Corrupt data page -16206 Write set corrupt -16207 Table <%> has invalid record length -16208 Unable to open databank <%>. SHADOW license required -16209 Unable to open databank <%>. NETIO license required -16210 Cleanup control area exhausted -16211 Not properly closed, dbcheck initiated -16212 TRANSDB restart directory corrupt -16213 Error when closing databank file. Please consult multiuser log file -16214 Blockdata DKBLK1 missing -16215 Error accessing remote TRANSDB, node will not be accessed further -16216 Blocksize not supported -16217 Error when generating internal key -16218 Operation not allowed. Licensed number of users exceeded -16219 Too many multi systems started -16220 Unable to retrieve limit on number of allowed users -16221 Lost contact with peer -16222 Record length from update before is invalid -16224 Transaction state table entries exhausted -16225 Transaction state identifier invalid -16226 Invalid function code -16227 Commit set corrupt -16228 Restart set corrupt -16229 Cancel requested -16230 Transaction cache inconsistent -16231 Shadow <%> is inaccessible due to incomplete CREATE SHADOW or SET ONLINE operation -16232 Database upgrade required -16233 Operation not allowed. Licensed number of users exceeded -16234 Execution interrupted by scheduler -16235 There are pending in-doubt transactions -16401 Routine cannot be dropped because it is in use -16402 Routine cannot be used because it is being dropped
These errors arise from miscellaneous problems that do not fall into the other classes. If the corrective action is not indicated by the error description, contact your Mimer representative for help.
-18001 Blockdata BLKDS2 not included -18002 Cannot log in, error in SYSDB initialization -18003 No privilege to open log file -18004 Databank LOGDB already opened by another MIMER/DB user. Could not be opened exclusively to drop log records -18005 Unknown language -18006 Language not properly installed -18007 Unable to fetch message text -18008 Restore in wrong sequence attempted -18009 Mismatching version of Embedded SQL and MIMER/DB -18010 Invalid log record found during restore operation -18011 Mismatching version of MIMER/DB and utilities -18012 The transformation of a TRANSDB shadow to master was interrupted before completion. Please login to BSQL to complete the transformation -18013 MIMER/DB started from SYSDB shadow. Transform SYSDB shadow to master with BSQL, or restart system from master SYSDB -18014 Alter shadow not allowed in SQL for system databanks. Use utility program instead. -18015 Open with hold is not possible when temporary tables are used for evaluation of the query -18016 Cursor could not be opened with hold as it is not prepared with hold -18017 With hold functionality not supported -18018 The network server version does not support scroll -18019 Bad parameters passed to DBAPI4 -18020 Unknown information code = <%> used -18021 Only SELECT, INSERT, UPDATE, and DELETE operations (excluding where current forms) may be compiled together in a single statement -18022 Distributed transactions not supported by server -18023 Requested DTC function not supported by server -18024 Failed to enlist transaction in distributed transaction -18025 Unable to retrieve transaction manager's whereabouts -18026 Failed to import transaction identifier -18027 Statement already active in other transaction -18028 Cannot initiate a new PSM debugger session, because the number of request threads is insufficient -18029 Execution interrupted by debugger -18041 Update of primary key columns for a table located in a databank, with NULL option is not allowed -18042 Primary key columns may not be updated by Level2 applications -18043 The rowid column may not be updated -18044 Inaccessible shadow found at LOAD operation -18045 The table specified in the preceding START LOAD statement can only be referenced using single value inserts while the LOAD operation is active -18046 WITH HOLD cursors cannot be used in XA transactions -18101 Operation not allowed. SHADOW license required -18102 Operation not allowed. MIMER/DB license required -18103 Operation not allowed. MIMER/DB Level2 license required -18104 Operation not allowed. MIMER/NET Client license required -18105 Operation not allowed. MIMER/NET Server license required -18106 Operation not allowed. MIMER/NET PC-Server license required -18107 Operation not allowed. Beta test version of MIMER requires BETA license. -18108 Error opening MIMER keyfile -18109 Operation not allowed. XA, distributed transaction license required -18121 Operation not allowed. VAR specific MIMER license required -18122 Authorization failure. Invalid attempt to connect -18201 SYSDB cannot be backed up using CREATE BACKUP without an ONLINE shadow -18231 <%> records dropped from LOGDB -18232 Shadow <%> is OFFLINE -18233 Unable to access databank <%>, because it is OFFLINE -18234 Error <%> occurred when trying to access shadow <%> -18235 Error <%> occurred when trying to access databank <%> -18236 Statistics updated for <%> tables -18237 Databank <%> does not have LOG option -18238 <%> records copied to incremental backup -18239 Unable to CONNECT, because database is OFFLINE -18240 Unable to CONNECT, because database is OFFLINE and one connection already exists -18241 Unable to CONNECT, because SYSDB is OFFLINE -18242 Unable to CONNECT, because SYSDB is OFFLINE and one connection already exists -18243 Unable to access databank <%>, because database is OFFLINE -18244 Could not get exclusive access to the database because one or more connections already exists -18245 Could not connect to database <%>, a system administrator is executing a statement that requires exclusive access to the database -18500 Database <%> not found in SQLHOSTS file -18501 Database <%> unknown on remote node -18502 Handshake message invalid, incompatible protocol -18503 Only remote databases are allowed, specify database which is not local -18504 The network server version is not compatible -18505 Local memory pool in network server exhausted (SQLPOOL) -18506 In the current version only one local (and several remote) databases can be connected at a time -18507 Unknown connection name <%> specified -18508 Already connected, connection name <%> -18509 Database name <%> invalid, too long or contains invalid characters -18510 Connection name <%> invalid, too long or contains invalid characters -18512 Illegal reentrant call -18513 Use another TCP/IP port number -18514 Too deep address indirection -18515 Cannot get value of thread-local variable -18516 The network server version does not support Level2 -18518 Catalog version from beta test. See Release Notes, how to upgrade -18519 Erroneous contents in SQLHOSTS -18521 Error opening SQLHOSTS, filename syntax error -18522 Error opening SQLHOSTS, file not found -18523 Error opening SQLHOSTS, file protection violation -18524 Error opening SQLHOSTS, file locked -18525 Error opening SQLHOSTS, too many opened files -18526 Error opening SQLHOSTS, file create error, disk space exhausted -18527 Error opening SQLHOSTS, other error (-7) -18528 Error opening SQLHOSTS, other error (-8) -18529 Error opening SQLHOSTS, other error (-9) -18530 Error opening SQLHOSTS, illegal access options -18550 Invalid network package format -18551 Unknown request code in network package (<%>) -18552 Network package longer than expected -18553 Internal data structures corrupt (DSNEE4) -18554 The UTILITY program does not have client/server support -18594 Query timeout period expired -18595 Network partner disconnected -18601 Could not connect to database <%>, unknown node '<%>' -18602 Could not connect to database <%>, unknown protocol '<%>' -18603 Could not connect to database <%>, unknown interface '<%>' -18604 Could not connect to database <%>, unknown service '<%>' -18605 Could not connect to database <%>, chosen protocol not supported on ALPHA/VMS '<%>' -18606 Could not connect to database <%>, network type not supported '<%>' -18607 Could not connect to database <%>, remote node is unreachable '<%>' -18608 Bad parameter NETID=<%> passed to network package -18609 Invalid parameter RECLEN=<%> passed to network package -18610 Invalid parameter BUFFER=<%> passed to network package -18611 Too many concurrent network connections -18612 Connection refused '<%>' -18613 Unexpected network event '<%>' -18614 The underlying network protocol does not have enough capabilities '<%>' -18615 Network service busy '<%>' -18616 Local or remote system resources are insufficient '<%>' -18617 Connection timed out '<%>' -18618 Insufficient privileges for attempted network operation '<%>' -18619 Unexpected network error '<%>' -18620 Network operation would block (asynch mode) -18621 Could not load network library -18622 Required routines missing from network library -18901 Multi-user system not started -18902 MIMER logins are currently disabled, try again later -18903 Access denied to MIMER multi-user system -18904 Unable to attach to multi-user system, no response -18905 Operation not allowed. Licensed number of users exceeded -18906 Invalid database path -18920 Machine dependent error-18920 -18921 Machine dependent error-18921 -18922 Machine dependent error-18922 -18923 Machine dependent error-18923 -18924 Machine dependent error-18924 -18925 Machine dependent error-18925 -18926 Machine dependent error-18926 -18927 Machine dependent error-18927 -18928 Machine dependent error-18928 -18929 Machine dependent error-18929
These errors arise from malfunction in internal Mimer SQL routines. Contact your Mimer representative for help.
-19001 Program level list corrupt -19002 No program level found -19003 Statement list corrupt -19004 Output parameter list corrupt -19005 Table list corrupt -19006 Unable to find log file, LOGDB corrupt -19007 Inconsistency detected when trying to update dictionary -19008 Unable to open SYSTEM base tables -19009 Dictionary table SYSTEM.USERS corrupt -19010 Unable to extract correct information from SYSTEM.DATABANKS -19011 Unable to extract correct information from SYSTEM.TABLE_CONSTRAINTS -19012 Dictionary mismatch found for table with TABLE_SYSID = <%> -19015 Sysid record in SYSTEM.OBJECTS not found -19017 Invalid MAE program -19018 Invalid operation code <%> at PC=<%> -19019 Missing IMC instruction -19020 Invalid function code passed to instruction <%> -19021 No databank control block found for <%> -19022 Bad function code passed to DSCDB3 -19023 Invalid pointer to naming structure -19024 Severity message program corrupt -19025 Invalid table descriptor -19026 Invalid table descriptor, log status invalid -19027 Base table must be opened before index tables -19028 Table root entry not found -19029 Unable to change position on write set because no mark is set -19030 Invalid length for allocation of program space -19031 Invalid table type -19032 No table control block found -19033 Cannot delete databank file outside transaction -19034 Bad function code passed to DSCRD2 -19035 Invalid index descriptor -19036 Error detected when closing table, hash chain corrupt -19037 Invalid internal table type encountered -19038 Write set inconsistency encountered -19039 Invalid internal statement identifier -19040 Invalid internal system identifier -19041 Invalid internal user identifier -19042 The static statement cannot be compiled because it is already identified with some other statement -19043 The statement cannot be prepared because it is already identified with a static statement -19044 Transaction control block chain corrupt -19045 Shadow <%> cannot be transformed because it is OFFLINE -19046 Databank <%> is referenced but not opened -19047 Table has not been opened with sufficient access to allow current operation -19048 Databank <%>, no shadow is found in dictionary with sequence number = <%> -19049 The internal update operation has not been prepared with the old record -19050 Catalog version not compatible with server -19051 Compiled LIKE pattern corrupt -19052 Could not store lookup path, inconsistency detected -19053 Output descriptor overflow -19054 Unable to initialize database system -19055 Unable to generate an internal key -19056 Inconsistent user identifier (not logged in) -19057 Scroll program corrupt -19058 Extended name not supported in static SQL -19059 Invalid error message descriptor -19061 Loss of significance for VARCHAR length -19062 Positive overflow for VARCHAR length -19063 Negative overflow for VARCHAR length -19065 Bad parameter for VARCHAR length -19066 Illegal operand for VARCHAR length -19067 Bad record number -19068 No matching record -19069 Corrupt cancel state -19071 Unrecognized data types for conversion -19072 Invalid read set record -19073 Insufficient internal descriptor area -19074 Internal inconsistency encountered in TCACHE -19075 Invalid internal DDU identifier -19076 Internal inconsistency encountered in table list -19077 Internal inconsistency encountered in DU1 -19078 Invalid parameter encountered in MOS -19079 Internal inconsistency encountered in DSETH3 -19080 Thread initialization failure -19081 Hash table missing in system control block -19082 Internal inconsistency encountered in DSGSH2 -19083 Internal inconsistency encountered in MCOMEM -19084 Runtime assertion failed -19085 Invalid descriptor encountered on server -19086 Invalid statement status encountered on server -19087 PSM debugger resources already allocated -19088 PSM debugger resources already deallocated -19089 Invalid parameter encountered in DDU -19091 Invalid function code passed to routine -19092 Invalid function code 2 passed to routine -19093 Invalid function code 3 passed to routine -19101 Not valid conversion of data types -19102 Not supported data type conversion -19103 Initialisation failure for data type conversion -19111 STMs for called statements remaining after disconnect -19112 Release of statements terminated due to error <%> -19113 Nonexistent parameter specified -19114 Specified collation not found -19115 LOB identification not found in directory table -19116 No LOB column in parameter list -19117 LOB start position out of bounds -19118 Client and server disagreed on LOB length -19119 Internal truncation error encountered in Mimer client driver -19122 Failed to load name information package for system id=<%> -19123 Failed to load table information package for table id=<%> -19124 Failed to load domain information package for domain id=<%> -19125 Cannot commit transaction for WITH HOLD -19126 WITH HOLD resource mismatch -19201 System error : <%>- Area outside MAE data storage -19202 System error : <%>- Attempt to qqwsal() in closed area -19203 System error : <%>- Cost value out of range -19204 System error : <%>- Error converting into Mimer format -19205 System error : <%>- Error from MDRCCI call -19206 System error : <%>- Error when reading databank option -19207 System error : <%>- Expression switch case not recognized -19208 System error : <%>- Factor was left unused -19209 System error : <%>- Failed to get a slave RST -19210 System error : <%>- Generation stack underflow -19211 System error : <%>- Group is not allocated -19212 System error : <%>- Host variable not defined -19213 System error : <%>- Host variable number mismatch -19214 System error : <%>- Illegal Set Func. mode switch case -19215 System error : <%>- Illegal Status switch case <%> -19216 System error : <%>- Index table not found -19217 System error : <%>- Invalid base pointer -19218 System error : <%>- Invalid object type -19219 System error : <%>- Invalid pointer -19220 System error : <%>- Main switch case not recognized -19221 System error : <%>- Multiple offset assignment -19222 System error : <%>- Multiple restriction groups -19223 System error : <%>- No area opened -19224 System error : <%>- Nonexistent member -19225 System error : <%>- No Tbl_desc for SCO -19226 System error : <%>- NOT stack overflow -19227 System error : <%>- NOT stack underflow -19228 System error : <%>- Offset outside MAE data storage -19229 System error : <%>- qqcbix() with illegal operator -19230 System error : <%>- qqcunx() with illegal operator -19231 System error : <%>- Error from MDRCFC call -19232 System error : <%>- qqrlst() with NULL list -19233 System error : <%>- qqwlst() with NULL list -19234 System error : <%>- Query result stack underflow -19235 System error : <%>- Query stack underflow -19236 System error : <%>- Rule matrix index out of range -19237 System error : <%>- Scan kind not implemented -19238 System error : <%>- Scan stack underflow -19239 System error : <%>- Selectivity factor value out of range -19240 System error : <%>- Semantic stack underflow -19241 System error : <%>- Set range violation -19242 System error : <%>- Set size incompatibility -19243 System error : <%>- Stack underflow -19244 System error : <%>- Statement switch case not recognized -19245 System error : <%>- Switch case not recognized -19246 System error : <%>- Too complicated UNION query -19247 System error : <%>- Too many nested subqueries -19248 System error : <%>- Traversal stack underflow -19249 System error : <%>- Unexpected EXPRESSION in HOST variables -19250 System error : <%>- Unexpected expression operand -19251 System error : <%>- Unexpected expression subtype -19252 System error : <%>- Unexpected node class -19253 System error : <%>- Unexpected SELECT ITEM -19254 System error : <%>- Unexpected statement subclass -19255 System error : <%>- Unexpected DD return code <%> -19256 System error : <%>- Unknown Host Variable type -19257 System error : <%>- Unknown statement type -19258 System error : <%>- WS stack overflow -19259 System error : <%>- X stack overflow -19260 System error : <%>- X stack underflow -19261 System error : <%>- Error logging is not enabled -19262 System error : <%>- Source position line or column is negative -19263 System error : <%>- Message insert string too long -19264 System error : <%>- Error logging is already enabled -19265 System error : <%>- MAE constant storage overflow -19266 System error : <%>- Selectivity rule number out of range -19267 System error : <%>- No entry for index id -19268 System error : <%>- qqcfnx() with illegal operator -19269 Unexpected duplicate row found in temporary table -19270 System error : <%>- Scan queue underflow -19271 System error : CPL - PSM depth overflow -19280 System error : <%>- Error from MDRTDC call -19290 Out of memory -19291 Invalid attribute type -19292 Error when trying to store procedure in dictionary -19293 Error when trying to share program -19300 <%> unhandled production -19301 Internal inconsistency detected in PSM -19901 Function not yet implemented
When an application has received a communication error, the connection will become unusable. The only valid operation on that connection will be DISCONNECT.
Error codes from the communication kernel layer (network routines):
-21001 Already listening on service <%> -21002 Error trying to ASSIGN channel for TCP/IP communication -21003 Error when creating socket -21004 Error when binding socket address for service <%> -21005 Error when getting port number for service <%> -21006 Illegal protocol specified: <%> -21007 Error when looking up host name: <%> -21008 Error when connecting to database <%> on <%> using <%> to service <%> -21009 Illegal channel id specified -21010 Error when reading data from network channel -21011 Error when writing data to network channel -21012 Channel is not open -21013 Channel is not accessible from this process -21014 Error when creating mailbox -21015 Error when declaring network object for service <%> -21016 Unimplemented feature -21017 Error when accepting new channel -21018 Error when doing local listen for database <%> on path <%> -21019 Too many channels used -21020 Multiple read requests on channel -21021 Multiple write requests on channel -21022 Local write when not owning buffer -21023 Cancel request illegal on channel -21024 No available channel id number -21025 Tried to open too many local servers -21026 Database server for database <%> not running -21027 Incompatible buffer versions -21028 Failed to do a LOCAL connection to the server for database <%> -21029 Illegal reentrant request on channel -21030 Network request would block caller -21031 Too large network I/O requested -21032 Could not find DSINI4 in single-user library -21033 Could not find DSHND4 in single-user library -21034 Could not find DSGMD4 in single-user library -21035 Could not find DSUMP4 in single-user library -21036 The channel is closed -21037 The specified network interface is not supported -21038 Could not lock communication buffers in memory -21039 Error trying to ASSIGN channel for DECNET communication -21040 Could not map library for single-user mode -21041 Could not initialize CK package -21042 Error when performing initial communication with database server -21043 Server rejected connection to database <%> on <%> using <%> to service <%> -21044 Server rejected named pipe connection to database <%> -21045 The address family for network protocol was unknown -21046 Error when creating named pipe server objects -21047 Error when setting up TCP server objects -21048 Unexpected communication error -21049 Error when reading/writing data to/from network channel -21050 Error when closing communication with database server -21051 All local communication slots are in use -21052 Database server request failed -21053 Database or network service not started Error when connecting to database <%> on <%> using <%> to service <%> -21054 Database server for database <%> not started -21055 The MIMER network service on <%> for <%> does not currently accept new connections. Try again later -21056 Local communication has been disabled for database server <%> -21057 Named pipe communication has not been enabled for database server <%> -21058 TCP/IP communication has not been enabled for database server <%> -21100 Command timed out -21101 Error mapping MCS (MIMER Control Storage) -21102 Error when doing system communication through the MCS -21103 MCS communication area is busy. Try again later -21104 Server for database <%> is already started -21105 Illegal directory specified for SYSDB82.DBF -21106 Error in parameter file -21107 Error when starting database server process -21108 Error when looking up database name -21109 Error when creating memory pool in database server -21110 Could not allocate space from SQLPool -21111 Error when initiating the ENQ/DEQ package -21112 Error when attaching a thread to the ENQDEQ area -21113 Error when initiating server I/O package -21114 Error when setting default directory for database server I/O package -21115 Could not start database server thread -21116 Protocol error- received new request before completion of last request -21117 Could not create proper execution environment -21118 Database server not operational -21119 Notification thread failed. Server can no longer respond to mimcontrol -21120 Illegal directory path -21121 Could not create new directory -21122 Channel closed by administrator -21123 Invalid channel number specified -21124 Error when initiating request (rq) queue -21125 Could not lock the bufferpool in memory -21126 Database server halted. Failed to generate automatic database dumps -21127 Database server halted. Dump files from the failed database are placed under <%> -21128 Error when stopping database server process -21129 Error when deleting memory pool in database server -21130 Error getting database server parameters -21131 Must be superuser to perform this function -21132 The environment variable MIMER_HOME must point to the MIMER distribution -21133 An illegal combination of command switches was specified -21134 The database parameter must be specified -21135 Permission denied -21180 Error opening SQLHOSTS file -21181 Error opening SQLHOSTS file - file name syntax error -21182 Error opening SQLHOSTS file - file not found -21183 Error opening SQLHOSTS file - file protection violation -21184 Error opening SQLHOSTS file - file is locked -21185 Error opening SQLHOSTS file - too many files are opened -21186 Error opening SQLHOSTS file - file creation error (diskspace exhausted) -21187 Error opening SQLHOSTS file - machine dependent code -7 -21188 Error opening SQLHOSTS file - machine dependent code -8 -21189 Error opening SQLHOSTS file - other error -21190 Error opening SQLHOSTS file - illegal access option -21191 Could not find a local definition for the specified database name
Error codes used by the server when creating database dumps. These codes are never returned to application programs:
Error codes reflecting problems in the layer that creates and interprets network packets:
Other file management error codes:
-21400 Illegal file name -21401 File not found -21402 File protection violation -21403 File was locked -21404 The file could not be opened since a system resource was exhausted -21405 The disk space is exhausted -21406 The file is not open -21407 Read not allowed on file -21408 Write not allowed on file -21410 Illegal argument -21411 Illegal character -21412 Memory allocation error -21499 Unspecified error
These errors arise when the Mimer JDBC Driver fails for some reason. The error codes are in the range -22000 to -22999. When using Java, the error message is always included in the exception that is thrown.
To get the complete and accurate list of error codes, execute the following command:$ java com.mimer.jdbc.Driver -errors
The following error codes are used by the Mimload application.
-23001 Unexpected DB error -23003 Load/Unload is not allowed within transaction -23004 Syntax error -23005 Out of memory -23006 Schema not found -23007 Databank not found -23008 Table not found -23009 No results were created for statement -23010 Statement has no parameters -23011 Output parameters are not allowed -23012 Could not open file -23013 Could not read from file -23014 Could not write to file -23015 Could not close file -23016 Syntax error in data descriptor -23017 Could not open log file -23018 Could not write to log file -23019 Could not close log file -23021 Statement failed, see next error
Mimer Information Technology AB
Voice: +46 18 780 92 00
Fax: +46 18 780 92 40